Sample cut horizontally, normal testing cannot be done. Woof: 8.6
Dry Particle Filtration Efficiency
ASTM F 2299
No Particle Penetration
Wet Particle Filtration Efficiency
ASTM F 2299
No Particle Penetration
Anti-Static; Surface Resistivity
BS EN 1149-1:2006
1.2 x 10⁹ Ω
Air Permeability (cfm)
ASTM D737
<0.55
Burst Strength (lbs)
ASTM D3787
20
Tensile Strength (lbs) Machine Direction
ASTM D5034
23.2
Tensile Strength (lbs) Cross Direction
ASTM D5034
18.1
Tensile Strength (lbs) Trapezoidal - Machine Direction
ASTM D1117
9.76
Tensile Strength (lbs) Trapezoidal - Cross Direction
ASTM D1117
4.97
Chemical permeation resistance
Agent
Test method
Penetration
Repellency
Bleach 5%
ASTM T903
Pass
—
Hydraulic Jack Oil
ASTM T903
Pass
—
Isocyanate Based Paint Hardener
ASTM T903
Pass
—
Motor Oil
ASTM T903
Pass
—
Sodium hydroxide
ASTM T903
Pass
—
Mineral Oil
ASTM T903
Pass
—
Blood
ASTM F1670-07
Pass
—
Coveralls stop at the collar; the 8002 covers what's left. This MicroGuard MP full-face hood drapes from crown to shoulders, closing the gap between suit and respirator for abatement, spray painting, remediation, and infectious-response work. The elastic face opening and tie let each worker set a snug seal around goggles or a mask.
The fabric is rated as a barrier to blood and has passed splash testing against common industrial liquids, so overhead drips and overspray stay off skin and hair.
Why crews pick it
Breathable laminate vents heat where PPE runs hottest — around the head
Tear-resistant film-and-nonwoven build stands up to repeated donning and adjustment
Head-to-shoulder coverage closes the contamination gap left by caps and bouffants
Choosing a selection results in a full page refresh.
